unisonic technologies co., ltd cd4069 cmos ic www.unisonic.com.tw 1 of 7 copyright ? 2015 unisonic technologies co., ltd qw-r502-020.d inverter circuits ? description the utc cd4069 consists of six inverter circuits and is manufactured using complementary mos (cmos) to achieve wide power supply operating range, low power consumption, high noise imm unity, and symmetric controlled rise and fall times. all inputs are protected fr om damage due to static discharge by diode clamps to vdd and vss. ? features * wide supply voltage range: 3.0v ~ 15v. * high noise immunity: 0.45 v dd typ. * low power ttl compatibility: fan out of 2 driving 74l or 1 driving 74ls. dip-14 sop-14 ? ordering information ordering number lead free halogen free package packing cd4069l-d14-r CD4069G-D14-R dip-14 tube - cd4069g-s14-r sop-14 tape reel ? marking dip-14 sop-14
cd4069 cmos ic unisonic technologies co., ltd 2 of 7 www.unisonic.com.tw qw-r502-020.d ? pin configuration 1234567 14 13 12 11 10 9 v ss 8 v dd ? block diagram
cd4069 cmos ic unisonic technologies co., ltd 3 of 7 www.unisonic.com.tw qw-r502-020.d ? absolute maximum ratings parameter symbol ratings unit dc supply voltage v dd -0.5 ~ +18 v input voltage v in -0.5 ~ v dd +0.5 v storage temperature range t s -65 ~ +150 c dip-14 700 power dissipation sop-14 p d 500 mw junction temperature t j 125 c operating temperature t opr -20 ~ +85 c storage temperature t stg -40 ~ +150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? recommended operating conditions (v ss =0v ) parameter symbol ratings unit dc supply voltage v dd 3 ~ 15 v input voltage v in 0 ~ v dd v operating temperature t a -40 ~ 85 c ? dc electrical characteristics (v ss =0v, t a =25c, unless otherwise specified.) parameter symbol conditions min typ max unit v dd =5v, v in =v dd or v ss 1.0 a v dd =10v, v in =v dd or v ss 2.0 a quiescent device current i dd v dd =15v, v in =v dd or v ss 4.0 a v dd =5v 0 0.05 v v dd =10v 0 0.05 v low level output voltage v ol |i o |<1 a v dd =15v 0 0.05 v v dd =5v 4.95 v v dd =10v 9.95 v high level output voltage v oh |i o |<1 a v dd =15v 14.95 v v dd =5v, v o =4.5v 1.0 v v dd =10v, v o =9v 2.0 v low level input voltage v il |i o |<1 a v dd =15v, v o =13.5v 3.0 v v dd =5v, v o =0.5v 4.0 v v dd =10v, v o =1v 8.0 v high level input voltage v ih |i o |<1 a v dd =15v, v o =1.5v 12.0 v v dd =5v, vo=0.4v 0.44 0.88 ma v dd =10v, vo=0.5v 1.1 2.25 ma low level output current (note 2) i ol v dd =15v, vo=1.5v 3.0 8.8 ma v dd =5v, vo=4.6v -0.44 -0.88 ma v dd =10v, vo=9.5v -1.1 -2.25 ma high level output current (note 2) i oh v dd =15v, vo=13.5v -3.0 -8.8 ma v dd =15v, v in =0v -10 -5 -0.30 a input current i in v dd =15v, v in =15v 10 -5 0.30 a
cd4069 cmos ic unisonic technologies co., ltd 4 of 7 www.unisonic.com.tw qw-r502-020.d ? ac electrical characteristics (note 1) (t a =25 , c l =50pf, r l =200k ? , t r and t f 20 ns, unless otherwise specified) parameter symbol conditions min typ max unit v dd =5v 50 90 ns v dd =10v 30 60 ns propagation delay time from input to output t phl or t plh v dd =15v 25 50 ns v dd =5v 80 150 ns v dd =10v 50 100 ns transition time t thl or t tlh v dd =15v 40 80 ns average input capacitance c in any gate 6 15 pf power dissipation capacitance c pd any gate (note 3) 12 pf notes: 1. ac parameters are guar anteed by dc correlated testing. 2. i oh and i ol are tested one output at a time. 3. c pd determines the no load ac power consumption of any cmos device.
cd4069 cmos ic unisonic technologies co., ltd 5 of 7 www.unisonic.com.tw qw-r502-020.d ? ac test circuits and switching time waveforms 90% 50% 10% 90% 50% 10% 90% 50% 10% 90% 50% 10% t r =t f =20ns t thl t tlh t plh t f t r v dd v ss v dd v ss output input t phl
cd4069 cmos ic unisonic technologies co., ltd 6 of 7 www.unisonic.com.tw qw-r502-020.d ? typical performance characteristics
cd4069 cmos ic unisonic technologies co., ltd 7 of 7 www.unisonic.com.tw qw-r502-020.d utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
